Skip the auto shop - Our mechanics make house calls

Q: Vehicle not starting

asked by on

The vehicle won't start. It tries to turn over, but doesn't start.

A: From your description it sounds like you ma...

From your description it sounds like you may be having a problem with your battery or starter. If either one of these components go bad your vehicle could try to crank but not have enough to get the engine started. I would ask for help from one of the mechanics at YourMechanic to come and diagnose what is causing your truck not to start.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car sputtering when driving.

The problem is most likely a fuel related problem like a fuel pump that works but does not produce enough pressure and a fuel filter that is clogged and needs replaced. The recommendation is to get a qualified mechanic to...

Q: My tires worked 10 years and now dry // are they cause of excessive fuel consumption?

Hi there. If the vehicle has been sitting for that long and now the fuel mileage is low, then the first thing that needs to be done is to drive the vehicle for about 5,000 miles. Just like when the...

Q: Opinion about 2004 Toyota Tacoma

Their trucks can last a really long time. Unfortunately, they are somewhat gas-hogs, but let's face it--all big trucks are gas-hogs to some extent. None of them are really going to get a great gas mileage when you are driving...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.