Id like an advice on what ways i can re program


Id like an advice on what ways i can re program Mechanic's Assistant: What is the make/model/year of your car? Range rover 2011 Mechanic's Assistant: Are you fixing your Range Rover yourself? What have you tried s...

Id like an advice on what ways i can re program Mechanic's Assistant: What is the make/model/year of your car? Range rover 2011 Mechanic's Assistant: Are you fixing your Range Rover yourself? What have you tried so far? Evoque Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I ahve chnaged the steering rack with a used steering rack but i cannot re program or flash the okd VIN on the module


Im using an SSD Software for the range rover but it wont allow me to re program the used steering rack that i have fitted as it shows the old VIN
Automotive Expert
Welcome to JustAnswer Mechanical Support! I amCustomerand I will be Investigating and Supporting your question today. I understand it can be really frustrating when your auto is not working an expected but don't worry as I am here to help! I may need further information, however, if required I will let you know! Sorry to hear your having issues with your vehicle I will try to assist you. Looking at the information you have provided it will most likely need Range Rover suitable diagnostic tool with Range Rover software a popular aftermarket Range Rover diagnostic scanner which can carry out this procedure is a Pro Logic scanner with Rang Rover software installed as it allows you to remove and replace vin numbers etc. Have you tried contacting a local Range Rover specialist as they shopuld have the correct equipment to carry out this procedure.

The city i am im there is no a good range rover specialist however i would really apprecite on the use of the after market scanner
Automotive Expert
The pro logic is probably the best none genuine Range Rover diagnostic scanner tool you can get it covers all aspects of Land Rover and Range rover models and has full module coverage with complete re programing of all modules.

Alrighttt thankyou i tried searching it up on google couldnt find the correct one could you guide me further with that
Automotive Expert
Sorry my mistake it is autologic here is a link to there website. https://autologic.com/

Thank youu
Automotive Expert
Your welcome.

What others are asking

How do I read the tachometer?
The tachometer is located on your instrument panel, and tells you how fast your engine is moving, in terms of revolutions per minute (RPM). The tachometer is a semicircle, with a hand that points to a number. This number, times...
Transmission fluid leak
A leaking transmission is definitely a reason for concern. Lack of fluid can prevent the transmission from shifting properly and eventually leave you and your vehicle stranded if it is left unresolved. The information provided on your Buick is a...
Battery/Alternator - 2008 Toyota RAV4
The battery and charging system should be evaluated first. However, if your battery is more than 5 years old, I would simply replace the battery (https://www.yourmechanic.com/services/battery-replacement) outright before doing further diagnostics (which are still needed). Batteries are actually critical components...
Car won't start - 1998 Pontiac Bonneville
Hi there. Disconnecting and re-connecting the battery, although the right thing to do while working on the fuel system, has tripped the security system and is not allowing a "start" sequence. (You don't mention it, but the security light in...
What causes the truck not to go?
Hi and thanks for contacting YourMechanic. Check the throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) (TPS) for voltage and resistance. There should be a 5 volt reference voltage to the sensor with a ground. There should be a resistance on the sensor. If...
Engen battery and brake fluid lights come on when driving
The check engine light (https://www.yourmechanic.com/services/warning-light-is-on-inspection) is coming on because there is a problem in one or more of the vehicles control systems that needs attention and the check engine light is letting you know that fault codes have been stored....
Backfiring after the engine is revved up.
Hi there. It is normal for an engine to backfire when revved up and the throttle is let off, especially if the muffler is small and the exhaust is loud. Now, if the engine is backfiring while the engine is...
I have a 2009 Audi A6 I have my check engine light came on my camshaft position B Sensor 2 and I replace both of my camshaft senso
Trouble codes do not represent a diagnostic and consequently parts should not be replaced merely because they are listed in a code description. Trouble codes are best considered indicators or clues as to the general area of the problem. If...