Ford transit mk7 2010 Rwd

Ford transit mk7 2010 Rwd Mechanic's Assistant: Okay, I'll connect you to the Mechanic to discuss this further with you. Before I do, is there anything else you want him to know? Cuts out when put in to Reverse. ...

Ford transit mk7 2010 Rwd Mechanic's Assistant: Okay, I'll connect you to the Mechanic to discuss this further with you. Before I do, is there anything else you want him to know? Cuts out when put in to Reverse.

Automotive Expert
Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm Pete. I will be happy to assist you with your question. May I ask to whom I have the pleasure of speaking with today?

Are you ready?
Automotive Expert
Hello. Nice to hear from you today! I'm sorry to hear you are having this problem. I know this can be frustrating. Was anything done to your vehicle that may have caused this issue?

What issueWhat problem. Ive asked no question as i was tird of waiting so i want a refund please
Automotive Expert
The issue I am speaking of is the vehicle cutting out when put in reverse. Do you still need help with that question at all?

Are you there nowI sell Transits for a living so this was a head scratcher for us. Ile fire away then and get my 5 pounds worthThis van has full history and has come from the military.
Automotive Expert
Have you had a fully compatible scan tool plugged into your vehicles data port that is able to read all of the computers in your vehicle to see what fault codes come up with this issue?

The van cut out when in reverse, something electrical so this is what we did,Unpluged the reverse light switch on the gear box and it was fine.To rule the switch out i put another switch off another identical van,Problem was still there.Then checked rear bulbs and swapped the whole light units with an identical, 1 bulb was dim but replaced and the problem was still there.Even tried leaving the rear lights unplugged.No codes showing.When it cut out one time the light that looks like a skid light or abs was showing, no codes.After this, took the 10 amp fuse for the reverse light out from the fuse box under the bonnet which leaves the brake lights working but not reverse light and then it was fine so that leads us to say it was something to do with the reverse light.Weve checked the wires right back and just found a kink were a wire had rubbed against a pipe, moved that and thaught id swap the turbo map sensor and air flow sensor and it seems fine for now?Yesterday it never did it when it was cold, just intermitent.It is a minibus so when the wipers are on and u select reverse, the rear wiper comes on but it wasnt that?when we unplugged the switch on the gear box it was good, no stalling. But no rear brake lights inc indicatorsAlso when we took the fuse which is just for the reverse switch out, problem had gone? But no reverse light then, other rear lights fine.The van is being delivered tomorrow????
Automotive Expert
This is definitely a difficult fault for me to be able to help pinpoint from here myself. I will have to opt-out to allow others here to take a look at this to see if they can help pinpoint the issue. I do hope you can get this resolved with ease!

Is anyone helping me

Can i have my 5 pounds refunded

What others are asking

Air conditioning stopped working, and car overheated
Sounds like a hose busted from your radiator and the fluid leaked out of the radiator. If the AC stopped working you may have broken a serpentine belt you will notice the alternator light come on the dash if that...
Electrical problems with keyless entry, headlights and radio
Hello. We will be happy to assist. The problem you are experiencing is common. The symptoms you have are identical to many other SL500 owner complaints. The component which causes all the misbehavior is the EIS (Electronic Ignition Switch). Symptoms...
Car won't start but when attempting to start it makes a repetitive "pop" sound.
Hi there. What could be happening is the engine has either a large vacuum leak or the timing chain ( has skipped a tooth making a camshaft out of adjustment. First look all over the engine for any possible vacuum...
I own a 2014 Chevrolet Captiva about 8 to 10 times a day the key will not come out of the ignition I have had the shifter linkage
The entire shift mechanism should be looked at. The shifter mechanism may be worn or bent if "adjustment" helped temporarily. Also the ignition switch may not be signaling the shifter inter-lock mechanism. Also, if the inter-lock mechanism is loose, out...
abs light comes on after brakes were fixed
While it may be possible abs sensors were damaged while the brakes were replaced, without being able to see them to inspect for physical damage, it would be impossible to say yes, they were damaged during other repairs. ABS sensors...
Key is stuck in ignition so i think its causing the battery to keep going dead
Hello there, many common faults will cause your key to become stuck in the ignition in your 2006 Chevrolet Aveo. When the key is in the ignition and turned this puts the vehicle into the on mode, which will drain...
My boy accidentally hooked battery cables up wrong on his truck, and now it's got white smoke that smell like gas coming out.
When hooking up the battery cables backwards, the ground became the hot and the hot became the ground. Most likely the computer (ECM) could have failed and the fuel pump may have burned up. I recommend checking all of the...
It’s a 2008 pt cruiser and when I try to reverse and I have to actually press the gas petal for it to be able to reverse it
Are the brakes or the parking brake sticking or stuck? You can check to see if the wheels turn freely to rule that in or out. If the wheels are not stuck, either the engine or the transmission has a...