Q: Transmission vibration.

asked by on

My transmission seems to be vibrating in a certain gear.

This vehicle may have a couple problems that need to be addressed. The first is the torque convertor of the automatic transmission has issues of internal lock up clutch slips or chatters causing jerking or bucking. The transmission would need to be removed and the convertor replaced. The transmission PCM may also need to be reprogrammed to control the lock up convertor. I recommend a qualified mechanic check for these issues and the repairs needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Transmission vibration.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Transmission problems

My first recommendation is to have a certified mechanic verify the symptoms with a thorough transmission inspection that includes a road test. Explain to the technician what you are experiencing so they can look out for these things during the...

Q: severe steering wheel vibration at speeds above 60 mph, but not below 60, and severe vibration during braking.

If you can wiggle the tire side to side then you either have a problem with inner or outer tie rod ends. You may have both of them that are bad. This will allow the side-to-side movement, but brake rotors...

Q: The heater control panel don't work and the radio don't work everything else on the dash lights up all the fuses are good

Hello, thank you for writing in. The power supply needs to run to that area of the dashboard before it is divided up between the different components. Considering that two components are both having a loss of power at the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.