Q: There is an inconsistent grinding noise when I press the brake

asked by on November 13, 2016

Just got new brake pads 4 months ago. We drove up from Orlando this weekend and by the time we got to Atlanta, my car started making grinding noise when I press the breaks.

My car has 132000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the tail light indicator mean?
The tail light indicator is located on the instrument panel. This light illuminates when the tail lights are turned on.
Liftgate opens then bounces up and down then closes back. What causes this?
The rear door has built in sensors and power motors that work together to close the door automatically when you push the close button. If there is a shorted button then this could cause it to close again as soon...
No light dimmer radio
Hello. On your dashboard, there should be a three piece button that is located between the speedometer and the radio. One of the three buttons should have a plus and minus symbol on it. There should also be a picture...
Transmission falling out of gear, hesitates to shift.
Hello. From what you describe it would appear that your vehicle is experiencing some sort of serious transmission issue. The symptoms you are experiencing can be caused by many things. A few probable causes are a bad shift solenoid, speed...
What does "battery saver active" mean?
Hello. Your message indicates that the electrical system voltage has fallen to 11.7 volts. This is rather low for a modern car with the engine running - normal voltage should be about 13.0 volts. Perhaps your new alternator has a...
All crank and no start - 1989 Jeep Wrangler
Hi there. There are several things that could cause this and it seems like you've covered quite a bit. Perform a compression check and compare the readings to specifications and across the cylinders. Check all fuses/relays (https://www.yourmechanic.com/services/fuse-replacement) and replace as...
Cadillac heater issue 2005 Cadillac DeVille
Hi there - I suspect your cabin heating scenario is a problem with the air blend doors in the heater unit itself. The lack of heater function typically has 5 causes: the engine is not getting up to correct temperature...
I have a 2006 dodge caravan and I been smelling gas for about a month but it's not burning alot of gas do you have any idea what i
It is possible that you have a leak in your exhaust system. Many times you will be able to smell gas when the exhaust system has a hole in it. The most common cause of this would be the exhaust...
Car shaking during start up while it is cold outside
You will need to make sure you are using the correct oil viscosity for the temperature outside. If you use the incorrect oil it may cause the VVT system to not work correctly and cause erratic running if one or...

Related articles

2012 Chrysler 200 vs. 2012 Chevrolet Malibu: Which One Should I Buy?
When you are looking for a small-range sedan, you need to get somewhere quickly and inexpensively, and may even need to take a few kids with you. Slightly larger than a commuter car, these mid-size options offer decent gas mileage,...
How to Buy a Good Quality Wheel Speed Sensor
For For vehicles that have anti-lock brakes, the wheel speed sensor plays an important role. They work together with the electronic stability control system that is found on so many vehicles today. This wheel speed sensor is responsible for keeping...
Symptoms of a Bad or Failing Cruise Control Vacuum Bleed Switch
Common signs include cruise control disengaging on its own or not disengaging when the pedal is pressed, and a hissing noise coming from the dash.