Skip the auto shop - Our mechanics make house calls

Q: Rev to start and keep above 2000 rpms when idling to avoid stalling

asked by on

I have to Rev to start and keep above 2000 rpms to avoid stalling while at idle and occasional smell

My car has 190000 miles.
My car has an automatic transmission.

Hi There, It sounds like you may have a dirty or failing idle air control valve causing your engine idle to fluctuate and eventually stall. The idle air control valve is a small valve on the engine’s intake system that reads the air intake as it comes into the motor. This is controlled by the car’s ECM which uses this information to make adjustments to the air/fuel ratio depending on various inputs such as outside air temperature, intake air temperature, load and various other things. As you accelerate, your car’s engine is receiving a much higher dose of fuel than when at idle and conversely, when you let off the gas pedal, there is a sudden change in this fuel supply as a result of your foot letting off the pedal. When this happens, the job of the idle air control valve is to bring this deceleration down to a slow and smooth idle rather than suddenly cutting off the fuel supply causing the motor to die. When the idle air control valve is not working properly, this cause a disruption in this process resulting in the engine not being able to idle properly. I would recommend having a professional come to your location to diagnose and inspect your vehicle.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Is this the transmission or something else - 2001 Honda Civic

Hello. Check coolant levels for the engine and the transmission fluid level (assuming automatic here - although not specified). If your Honda has the continuously variable transmission (CVT), there are a number of Technical Service Bulletins (230390 and 231604 for...

Q: Dash and headlights flash for about 1 minute after shut off

Hi there. It sounds like the lighting system has feedback through another circuit. This could be due to a short circuit, open circuit, missing/failed ground point, corroded ground point, corroded connector, loose connector, or relay block faults. With the age...

Q: I'm going to go look at a 2008 g6 soon and the crankshaft position sensor is out what kind of problems can it cause?

If the crankshaft position sensor has totally failed, the vehicle may not start which of course will make it very difficult to evaluate whether the car is a wise choice. The car should be running before you buy it, otherwise...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...