Skip the auto shop - Our mechanics make house calls

Q: Rear axle slipping out.

asked by on

Rear axle slipping out

My car has 96798 miles.
My car has an automatic transmission.

Hi there. If you have a solid axle housing on the vehicle, then the c-lock on the axle broke causing the axle to come out. If your vehicle has CV Shafts, then the joint to the CV Shaft may have broke off a bearing causing it to plunge inside making the shaft fall out. I recommend seeking out a professional, such as one from Your Mechanic, to help you diagnose your axle issue.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Back end sitting on axle and tires.

You broke something in the rear suspension like the strut or spring. I would recommend having a mechanic, like the certified ones at YourMechanic, come and check it out for you to see what is broken causing the problem.

Q: Act like it runs out of gas but it doesn't

It sounds like you're having a fuel pressure issue. If you have a fuel pressure gauge, connect it to the shrader valve on the fuel line under hood and check the readings. It should be over 10psi if it has...

Q: throttle body control

Hi there. Typically the throttle body itself does not need to be calibrated after replacement. It is vital however to have a professional mechanic complete a check engine light inspection so they can clear all stored error codes. It is...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.