Skip the auto shop - Our mechanics make house calls

Q: How do I properly maintain the sunroof?

asked by on

How do I properly maintain the sunroof?

Over time, the sunroof can collect dirt in the seal, which can keep the sunroof from operating correctly. It’s a smart idea to periodically maintain the sunroof to keep this from happening. To do o, open the sunroof, and remove any visible debris. Then, use a cloth, some mild soap, and some water to wash the seal. Tip If you see grease around the sunroof seal, do not wash it away. This is important lubrication.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I clean the interior?

Keeping the interior of your car clean is important, but it’s not hard to do. The most important thing is to stay on top of it, as dirt, dust, and debris can build up in a surprisingly short amount of...

Q: Car needs an oil change

Raise and support the front of the vehicle. Using a drain pan under the engine remove the drain plug and drain the oil. While the oil is draining from the top remove the oil filter housing top cover using the...

Q: How do I tilt the moonroof?

The moonroof can be tilted to let in a little bit of fresh air. To tilt the moonroof, press the center of the power moonroof switch (located next to the moonroof). Press the center of the switch a second time...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.