Q: Non runner wont start

Hi. Window tint can affect the operation of the windows. Spray the inside of the glass with soapy water. If the window now works properly, the tint is to blame. The noise sounds like a wheel bearing going bad. They...

Hello. From what you describe, it sound like your transmission is slipping. The first thing to check would be the transmission fluid level. If the level is low, it will need to be topped up to the full level. If...

Hi there. From the description you have provided, your vehicle's left front and right rear caliper locking would have been a combination/proportioning valve before ABS (anti-lock brake system). The EBCM (electronic brake control module) controls the valves in the hydraulic...

Although it is possible for a collapsed (internally and thus "invisible") rubber brake line to cause a retraction failure, by far the most common scenario is the caliper is sticking. If the calipers have more than, say, 70,000 miles on...

Hi there. Assuming your vehicle has ETC (electronic throttle control) (https://www.yourmechanic.com/services/throttle-controller-replacement), "drive-by-wire" problems can develop when cleaning is performed. Manually opening the throttle plate may have affected the close position. An idle relearn performed with a capable scanner may resolve...

It is normal for the front wheels to spin in slick conditions. There are a few things that can contribute to this occurring more easily though. Tires with low tread would be the biggest contributor to such a problem. The...

It's not unusual for older cars to be missing some of the splash shields and covers. Sometimes you'll never notice, sometimes, such as now, you can see a problem. If water from the rain or spray from the road gets...

The computer is making the beeping noise as there is an issue with the starting circuit or main power circuit. Check the start relay and the main computer relay. See if they are getting hot. A hot relay will disconnect...

Hi There, Code P0017 relates to the crankshaft position sensor. A crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) is an electronic device used to monitor the position or rotational speed of the crankshaft. This information is used by engine management systems to control...