Q: No power to fuse box

asked by on

No power to fuse box.starter is good.

My car has an automatic transmission.

If you are not getting any power to anything then you will need to first the battery to see if it has above 12 volts? If it does then you will need to remove and clean the battery posts and inside of battery cable clamps and then retest system to see if it now starts. If not then you a problem in the main fuse box and will need further diagnosis by a mechanic like one from YourMechanic.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. No power to fuse box

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Is it appropriate to use 5W30 oil instead of 5W20?

Hello. Using 5W30 oil for your vehicle will not blow out the engine. However, your vehicle will not run as efficiently as it should and you may experience a loss of fuel economy. Your vehicle runs best at 5W20...

Q: I have no power at all. No dome light, no radio, nothing. I have replaced the alternator battery and starter and checked all fuses

I suspect your problem is in the power distribution box or in the connections going to it. Chrysler has a fancy name for it, they call it a TIPM for Totally Integrated Power Module. These modules have a lot of...

Q: Input turbine speed sensor B has stopped working

Hello and thank you for your question. It sounds like the input turbine speed sensor B has failed or lost connection to the engine control module (ECM). You will first need to check the wiring to the sensor and see...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.