Engine light came on, it started not accelerating, & it w...


Engine light came on, it started not accelerating, & it was overheating I turned heat on high & it wouldn't blow out hot air I pulled over and parked car as no heat would come from engine it's a 2004 Infiniti G35 2wd 3.5l 6 cylind...

Engine light came on, it started not accelerating, & it was overheating I turned heat on high & it wouldn't blow out hot air I pulled over and parked car as no heat would come from engine it's a 2004 Infiniti G35 2wd 3.5l 6 cylinder engine sedan Mechanic's Assistant: When it comes to this particular vehicle, have flat tires been a problem in the past? Yes Mechanic's Assistant: Are you fixing your G35 yourself? What have you tried so far? All I've done is buy a thermostat and water pump in hopes it's one of these but I am having a mechanic put them on should that be my problem Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No I don't believe so

Automotive Expert
Hi! My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I **may** need to ask questions to find out basic information to help solve your specific problem. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. If it stopped accelerating then you most likely have internal engine damage. Since the heater was not blowing hot, that indicates that the coolant was low. You will have to refill the cooling system and pressure test it to see where the leak is coming from. Since you likely have an internal engine damage you also need to do a compression test and a combustion chamber leak test. This will determine whether or not you have a head gasket failure or a warped head problem from the overheating. My goal is to earn a 5 star rating experience. Do you have any questions? Please feel free to reply back to me. If I’m not online at the time, I will respond ASAP when I get back.

It literally overheated and I pulled right over and my boyfriend came to drive it off the freeway and said he had no issues with it accelerating he drove it off the highway and into parking lot where we parked and have left it the reservoir wasnt low but we couldn't check the neck as it was hot
Automotive Expert
I understand. The problem is that if the engine starts losing power from overheating, it usually has damaged the engine. Of course this is all speculation so the tests I gave you would be required to determine the actual fault.

when I pulled over I couldn't get the temp gauge to come down at all he said though that when he drove it off the highway that it went all the way hot & then came down some & then went up that it was jumping up & down
Automotive Expert
Yes you will have to test it but it sounds like the head gaskets are blown.

Ok thx u
Automotive Expert
You're very welcome.

What others are asking

car keys getting hung up in the ignition
You cannot buy regular keys and key cylinders to replace the code key set you have now. You can check to see if you can purchase the code key ignition set aftermarket, but I would only recommend the dealer part....
I put my car in park and turned it off, now the shifter won't move
From the description you have provided, it would appear to be a shifter and/or shift cable problem. A bad shift interlock solenoid (https://www.yourmechanic.com/services/shift-interlock-solenoid-replacement) may be preventing the shifter from moving. It could also be that the shifter or shift cable...
Battery shot?
I would not recommend using jumper cables as a means to connect your battery for a couple of reasons. First of all, it can be dangerous as it can create additional risk of sparks that would not otherwise happen when...
I've got codes P0171 P0102 P0113 P0171 P0101 from the CEL and TRAC being lit up. This happened all of a sudden and the 2010 Toyot
Hi there. The codes P0171 (System too lean bank1), P0102 (mass airflow circuit low), P0113 (intake air temperature circuit high), and P0101 (mass airflow circuit range/performance) could be, all related to a faulty MAF (mass airflow) sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The TRAC...
My warning sign is on and I don't know why
Hello. Thank you for writing in. The issue with the vehicle can easily be diagnosed with a vehicle diagnostic scan. To describe this further lets start with the warning light. When the car is turned to the "On" position, the...
Do I need a whole new ignition or just the ignition switch?
You will need to have the damage to the ignition lock cylinder housing checked to see if just the lock cylinder can be replaced if no damage to housing was done. You will need to have the door and trunk...
I broke down yesterday and the engine will crank and back fires but will not run 1993 Dodge Dakota
Hello. I would typically start by doing a compression test of the engine. If the compression is low then there is a timing chain issue. If the compression is fine then you may have an issue with the ignition timing...
Car shaking & making loud noise only bt 30-40 mph.
Hi there. In most cases, an engine misfire is caused by either an ignition or fuel system related component. Specifically, either a fuel injector is not firing correctly or the spark plug or ignition coil is not firing correctly. The...
Hard shutter or vibrate at turning low speeds
Hello, thank you for writing in. If the issues started after the work that was most recently done, you want to verify that those repairs were done right and are holding. If the vibration and shaking were present before hand,...