Hi I'm looking to get my code for my radio as had new bat...


Hi I'm looking to get my code for my radio as had new battery fitted and the code not in the log book Mechanic's Assistant: Do you have a scan tool to read the codes? No Mechanic's Assistant: What is the make/mode...

Hi I'm looking to get my code for my radio as had new battery fitted and the code not in the log book Mechanic's Assistant: Do you have a scan tool to read the codes? No Mechanic's Assistant: What is the make/model/year of your car? Nissan note Mechanic's Assistant: What year is your Nissan? 2012 Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? I'm just looking for the code as don't no where to find it as was not in my log book or on any paper work I have

Automotive Expert
Hi! This is Anthony, a mechanic here on Just Answer. Sorry to see you're having trouble with your radio. Unfortunately, the mechanics on Just Answer are no longer able to provide radio codes, pin codes, etc. These security measures were put into place to protect vehicle owners like yourself from theft. If you can't locate the code in the vehicles manual or sticker on the glove box, your local Nissan dealer can provide you with the code. I recommend contacting the parts department as they are usually the easiest to deal with. I'm sorry, I know this isn't the answer you were hoping for. However, we need to follow policy to ensure all our customers are protected from theft. If I can help in any other way with the radio, please don't hesitate to ask. Thanks for choosing Just Answer and enjoy your weekend.

after that will I get my £5 back
Automotive Expert
I'm just the mechanic but will refer this to customer service now. Thanks!

What others are asking

Window not working
There are a few reasons why the window in your Honda Civic will not roll up or down. The issue may be as simple as a blown fuse, or something as serious as a bad window motor. There may also...
Power steering Leak
The leak sound like it is coming from the rack and pinion seals. A sealer will not work for power steering pressure leaks in most cases. You will need to have the system pressure tested and then the rack and...
Bad jerk clunk at speed from rear?
This is a common issue when driveshaft u-joints begin to fail. When there is too much clearance in the U-joints to the drive shaft, this type of clunking sound and slight kick back when stopping will occur. This is a...
Leaking transmission fluid - 2004 Ford Crown Victoria
Hi and thank you for contacting YourMechanic. There are 3 places for transmission leaks (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection) to go - externally to the ground, through the module vacuum tube, and into the coolant system through you transmission cooling lines. Since there is...
Car keeps overheating. Making a steam noise. Coolant cartridge runs out about once a week.
You will need to trace the leak (https://www.yourmechanic.com/services/coolant-is-leaking-inspection) and repair whatever the issue is. To trace a cooling system leak, the best way is to run the car and watch for the leak. The most common places for a leak...
Will they test the alternator to make sure it needs to be replaced?
Hi There, It sounds like you may potentially have a faulty voltage regulator or alternator. When the voltage regulator is not working properly, this may result in the alternator allowing too much power to be delivered to the battery resulting...
Why do I keep getting a P0101 code in my 2011 Nissan Sentra
Hello. If you are continuing to get the same code then the engine needs to be checked first for any vacuum leaks. The slightest leak in the intake tubes or any of the vacuum hoses or gaskets will cause this....
Question
There is no difference between the written estimate, documentation of warranty, and all other required paperwork that you would receive from YourMechanic's certified mobile mechanic versus what you would get if you visited a higher cost, conventional brick and mortar...
Went too long without oil change and started hearing metal clanking noises. What should I do?
Hi Delmy. Thanks for contacting us today. The truth is, without removing the valve covers and inspecting the internal engine components, there is no way to be 100% what damage has occurred and what repairs are needed. When you have...