Q: My Dodge Charger rt makes a noise like tick but it's small and it goes away for a while then comes back

Hello. The leak is what needs to be identified and repaired. If the fluid is coming out, then the vehicle will not have any power assist. Most of the time, a serious leak like this comes from one of the...

I think you meant to say that the engine's cooling system is leaking, rather than the AC system. Without testing the cooling system, there is no way to tell where the leaks are. The hard starting (https://www.yourmechanic.com/services/car-is-hard-to-start-inspection) may not be...

This is correct. If your car's starter was failing, it would not be able to be jump started since the power from being jump started is still eventually sent to the starter via jumper cables rather than your car's own...

If the car fails to accelerate (https://www.yourmechanic.com/services/car-is-slow-to-accelerate-inspection) or is stalling (https://www.yourmechanic.com/services/car-is-stalling-inspection) there is something wrong with the fuel or ignition systems and possibly the air induction system. Only an in-person diagnostic will reveal the cause(s). Possibilities that I would initially...

Hello. The most common cause of the high engine idle accompanied with a delayed acceleration will be a vacuum leak in most cases. This engine gets vacuum leaks (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) on the vacuum connection on the intake manifold (https://www.yourmechanic.com/services/intake-manifold-gaskets-replacement) for the...

The park assist for your vehicle uses the rear bumper sensors for the park assist. When you hook up a trailer you will get a park assist off indicator. This is a normal operation. There is no repairs needed.

Hello, it is unfortunate you are having issues find parts. You may want to try cleaning the throttle itself, cleaning the idle air control valve, and making sure the air filter and housing is clean. Make sure the throttle actuator's...

Hi there. The issue seems to be that the fuel level indicator sending unit is not working properly. When your fuel gauge is reading at a 1/4 tank, it maybe at 1/8 or 1/16 of a tank causing the fuel...

Hi there. It is highly likely that you have an accessory switch, relay or fuse that is damaged and causing these components to not work correctly. If you'd like, you can have one of our mobile mechanics come to your...