Q: Knocking sound in engine car won't start

The trunk lid open Warning Light is located on the instrument panel. This light illuminates when the trunk is open, or not properly closed. When the trunk is closed, the light will turn off. Tip The trunk lid open Warning...

A concern like this can be produced by a number of different things. Such as; a large vacuum leak in the intake system, lack of airflow to the intake system, lack of fuel delivery caused by a failing fuel pump,...

Hey there. You'll most likely need to have a locksmith or a mobile mechanic to come out to your location to see if the vehicle needs a new ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement) and lock cylinder, or if the original one can...

Hello there, thank you for asking about your 2004 Kia Amanti. There are a couple of other things that can cause your symptoms. A failing engine speed sensor like a crankshaft position sensor can cause the vehicle to stall when...

The trip odometer display typically allows you to track an A or B trip on a 2015 Dodge Avenger. If you've referred to your owner manual and followed the instructions for resetting the trip odometer, and it's not working, it's...

It seems like your issue isn't going to be resolved without the dealership. However, there may be a couple of things we can do to resolve your issue. I will go through a couple of steps and hopefully it will...

Hi there. The two OBD-II error codes you posted including the P0098 OBD-II Trouble Code (https://www.yourmechanic.com/article/p0098-obd-ii-trouble-code-intake-air-temperature-sensor-2-circuit-high-by-jay-safford) and the P0238 code (https://www.yourmechanic.com/article/p0238-obd-ii-trouble-code-turbocharger-boost-sensor-a-circuit-high-by-jay-safford) are similar in many ways. The P0098 code (https://www.yourmechanic.com/article/p0098-obd-ii-trouble-code-intake-air-temperature-sensor-2-circuit-high-by-jay-safford) indicates that there is an issue with the intake air...

Hi there. There are connectors in the back of the dash gauge cluster in the dashboard. One or all of the harness are loose and causing an issue with the gauges. Remove the dash panel and remove the dash gauge...

Check the ignition timing on the distributor and see if the timing is off. If the timing is good, then the accelerator pump in the carburetor or the fuel injectors are not working properly (if your vehicle has TBI injection)....