Q: Getting fuel, getting spark, and won't start.

asked by on

new fuel pump, new fuel filter,new cap rotor plugs wires oxygen sensor new iac sensor new coolant sensor

My car has 90000 miles.
My car has an automatic transmission.

Check the ignition timing on the distributor and see if the timing is off. If the timing is good, then the accelerator pump in the carburetor or the fuel injectors are not working properly (if your vehicle has TBI injection). If you need further assistance with your engine not starting, then seek out a professional, such as one from Your Mechanic, to help you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Getting fuel, getting spark, and won't start.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Swapped carburetor and the engine stalls out.

Hi there. When you swap out carburetors on engines, you would have to set up the carburetor and adjust the float bowl along with setting the idle. With a Rodchester Quadra-jet, you would need to have the engine idle at...

Q: how to tell if timing chain is bad

Hello and thank you for contacting YourMechanic. Misfires can be caused by sloppy timing chain, spark plugs and wires not working, injectors not working, or a problem within the engine. To check the timing chain, get a timing light and...

Q: How much is it to replace the engine in a 2013 Chrysler 200 2.4 L

Hello - hot enough to melt a sensor is possibly an exaggeration, but it does sound like the engine needs a careful "going over". I recommend a thorough engine inspection performed by a mobile, professional mechanic, such as one from...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...