Skip the auto shop - Our mechanics make house calls

Q: I have an oil leak and a low oil pressure light on.

asked by on

The low oil pressure light on my car is on, The car is also leaking oil.

Sounds like it could be the oil pressure sensor. Have a technician test the sensor to determine if it needs to be replaced. I definitely would not drive it until that is checked because you could do damage to the vehicle if it has no oil pressure.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Check Oil Light coming on.

Hello. You are correct that the light can come on for these reasons. If the oil light comes on and there is no engine noise then it is more than likely the oil pressure sensor that needs to be replaced....

Q: My truck is not running right

Hello, thank you for writing in. Since the speedometer reads 0 instead of bottoming out, I would say the problem has to do with the signal coming to the speedometer. This could be from something such as a sensor failing...

Q: Active body control light on and hydraulic fluid is leaking.

Hello, thanks for the question, I'm sorry I can't help you with the price but I can tell you a little about what has to be done to make sure we have your problem fixed. First your car would be...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...