Q: How hard is it to get the vacum line and gas line off of the canisister

asked by on

engine light came on and went to auto zone for code it said it was canister purge valve so I was wondering how hard they are to change

My car has 180000 miles.
My car has an automatic transmission.

The purge valve is in the engine compartment and the vapor lines are just squeeze connector and pull off the line. Then two bolts to remove valve and then install the new one and clear codes.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How hard is it to get the vacum line and gas line off of the canisister

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Turn key to start long start time occasionally changed fuel pump still hesitate to start

Hello. Your no start condition can be caused by a number of things. If you changed out the fuel pump I am assuming that the engine cranks over fine, but it just won't start at times. From my experience with...

Q: Coolant and noise issue

Generally, when a water pump is going bad, you may hear a bit of a whining sound combined with the pump leaking. The most common place for the water pump to leak from is the pulley shaft seal which is...

Q: I need to know the purge valve solenoid location and how long it takes to replace it.

Hi there. There are two different locations that the purge valve was located at, depending on the vehicle type. The first location would be on the engine intake next to the throttle body on the left side when viewing the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.