Skip the auto shop - Our mechanics make house calls

Q: How do I use the Fuel Used setting?

asked by on

How do I use the Fuel Used setting?

A: The driver information center (DIC) provide...

The driver information center (DIC) provides you with a lot of different information. At any moment, you can choose which information you would like the DIC to provide. To choose the Fuel Used setting, press the Menu button on the turn signal lever until the DIC displays Trip/Fuel Information. Then, use the arrows on the turn signal lever to scroll through the options until you reach Fuel Used. The Fuel Used setting will tell you how much fuel your vehicle has used since the last reset.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: after takeing off the fuel cap and putiing fuel after replacing the cap the car take 2or3 time to start turns over good but

The problem is a leaking purge control valve is not sealing fumes passing it from when the valve is off. This will allow excess fumes that builds up in the fuel tank from refueling. These fumes get into the intake...

Q: Stereo quit working after hooking up a code reader in a shop.

Check the fuses to the radio and see if they are burned. If so, then replace the fuse. If the fuse is good, then the wiring was disturbed under the dash and may have knocked loose the radio wires or...

Q: Battery and alternator are good, yet there is a slow crank when trying to start the car. Battery saver mode is on.

Hello. Battery saver mode comes into play when the electrical system voltage is too low. This mode shuts off "non-essential" components like the AC compressor in order to "get you to a safe place" before the battery is dead. There...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.