Q: Q: How do I select a radio station?

asked by on

How do I select a radio station?

It’s very easy to select a radio station. Simply press the Seek button to play the next higher station, or press the Track button to play the next lower station. Keep pressing these buttons until you arrive at the station you would like to listen to.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I select a radio station?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I adjust the sound on the radio?

While your radio is set for decent audio performance across a wide range of music and entertainment types, you might find that you need to adjust the sound depending on your preferences and on the type of music in question....

Q: What does the Park Assist Off message mean?

The Park Assist Off message can appear in the driver information center (DIC). When the DIC displays this alert, a temporary issue has disabled the park assist system. When the issue is resolved, the alert will go away.

Q: My car has like a winding noise when driving if i turn the steering wheel left the noise goes away but then when i steer straight

Hi There, What you are describing sounds like a wheel bearing that may be starting to fail. If the sounds is more pronounced when turning specific ways, this indicates that it is usually the opposite wheel bearing of the way...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.