Skip the auto shop - Our mechanics make house calls

Q: How do I lock and unlock the rear windows?

asked by on

How do I lock and unlock the rear windows?

If you have kids, you may not want them to have access to raising or lowering the windows. You can use the window lock switch to prevent the rear window Power button from working.

  1. Locate the Window Lock button on the driver’s side armrest. It has an image of a window with an X drawn through it.

  2. Press down on the button to lock the rear window.

  3. Press down on the button again to unlock the window.

Tip

All the window switches still work at the driver’s position, when the window are locked out.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Replaced alternator and battery car still will not start it will crank

If the engine cranks at adequate RPM, be sure there is adequate fuel in the fuel tank and that the fuel is not old. Download any OBD-II trouble codes that have been stored and examine those codes for diagnostic clues....

Q: Buttons don't work after a minute or so

Hello and thank you for contacting YourMechanic. The security system is acting up and is becoming active cutting off circuits to the vehicle. The system is thinking that the car is being stolen. Remove the battery cables positive '+' and...

Q: My 1998 Toyota Corolla won't accelerate

Hi, thanks for writing in. This may be likely related to a faulty mass airflow sensor which is a unit that regulates air intake as it is mixed with fuel. When this is faulty, it can cause an imbalance in...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.