Q: How do I buckle a seat belt?

asked by on January 19, 2016

How do I buckle a seat belt?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Rattling noise in neutral. Car won't go over 30mph in 3rd.
Hi thanks for the question, man, there is nothing worse than a car that won't go anywhere when we want or need it to. It sounds like you may be having a problem with your catalyst converter in your exhaust....
Ball joints
It is not normal to have the ball joint welded to the vehicle. All factory welds are clean and painted like the chassis, so it should be easy to tell if it was a weld that was done afterwards. This...
My check engine light came on after getting a jump start from AAA and when i got home i turned the car off and the light stays on
Hello. From what you describe it would appear that your vehicle is experiencing more than one issue. P2070 is the code indicating the intake manifold tuning valve is stuck open. This may be linked to your performance issue. Dark smoke...
where is the crank position sensor located we can't locate it
The crankshaft position sensor is almost always located very near or right behind the crankshaft pulley. This is due to the fact that the crank pulley is the only place outside of the engine that is connected to the crankshaft...
Bolt underneath engine block is leaking water left side 2001 ranger
I'm not sure what "bolt" you're talking about and you don't say what engine is in your vehicle. My recommendation is to have a professional pressurize the cooling system to pinpoint the exact location of the leak. Allowing the engine...
Brake calipers needing replacement after brake pads and rotors were replaced?
I think you have it backwards. The pads and rotors do not cause bad calipers, but a sticking or binding caliper (https://www.yourmechanic.com/services/brake-caliper-replacement) can cause the pads to wear excessively and cause the pads to dig into the rotors. The calipers...
Stalling and overheating - 1995 Honda Accord
When you say you had to keep giving it gas to keep from stalling, I'm thinking the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) there. You can clean the throttle body (https://www.yourmechanic.com/services/clean-throttle-body), the valve, and adjust the linkage, but the idle air...
I have a 2004 Dodge Ram 1500 5.7 Hemi engine V8
Hi There, It sounds like you may have a couple of separate issues going on here. The idling problem may suggest you have a dirty or faulty idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air...
RPM fluctuates when shifting into gear
This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, turning on AC or engaging the brakes). The Manifold Absolute Pressure (MAP) sensor...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Silverado
While While the Ford F-150 is still the best-selling pickup truck in the US, the 2012 Chevrolet Silverado is one of the finest half-ton pickups available today. In fact, the Silverado and the GMC Sierra are actually the same vehicle...
A Buyer’s Guide to the 2012 Mini Cooper Convertible
The The 2012 Mini Cooper Convertible offers lots of head room while providing both a fun riding and driving experience. There are many personalization options, so you can make the convertible your own unique vehicle. For example, contrasting piping and...
A Buyer’s Guide to the 2012 Mazda 3
The The compact car class is definitely a competitive one, with established models like the Toyota Corolla and Honda Civic taking up a lot of the market every year. However, if you’re looking for a really attractive compact sedan or...