Q: How do I adjust the security relock timer?

asked by on

How do I adjust the security relock timer?

For security purposes, your car will relock if you unlock it but never open the door. For instance, if you unlock your vehicle with the keyless remote and then change your mind and go back inside without remembering to lock the vehicle, the doors will relock, and the security system will arm itself again. The time that the vehicle waits before relocking can be adjusted with a few easy steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the +/- buttons to highlight Customize Settings, then press Source. 4. Use the +/- buttons to highlight Door Setup, then press Source. 5. Use the +/- buttons to highlight Security Relock Timer, then press Source. 6. Use the +/- buttons to choose between 90sec, 60sec, and 30sec, then press Source.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the security relock timer?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Sluggish starting

If the engine is not turning over fast enough, the problem is either your battery or starter motor. The starter requires a lot of power to operate properly, if the battery is weak, the starter will not turn as fast...

Q: How do I fold the side mirrors?

The side mirrors can fold in to decrease the width of your vehicle. You should always fold in the mirrors when parked on a busy street, or when driving through an automatic car wash. To fold the mirrors in, simply...

Q: "This morning Engine Light, Traction Control Light, and Electronic steering light is on. " I went to Honda dealership last week an

Hi Iqbal. Thanks for sending the question today. Warning lights simply indicate that a possible fault has been detected by the sensor monitoring the system. In most cases, when the light illuminates, it's due to an electrical glitch, poor connection,...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.