Front end bounces when applying brakes. 07 gmc sierra. I ...
Responses
Mike V.
243 days ago
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly.
May I ask whom I am chatting with today?
Customer
243 days ago
Joe
Mike V.
243 days ago
HI Joe, it's nice to meet you.
Do you feel shaking in the steering wheel or is the front of the truck actually bouncing up and down?
Customer
243 days ago
Truck is bouncing. Steering wheel isn't shaking like warped rotors
Mike V.
243 days ago
Ok, I would have to agree the place to start would have to be the shocks. I am not sure why the larger wheels would cause the issue, but if your positive it's not the brake rotors, I have to agree with you and start with the shocks and take it from there.
Customer
243 days ago
The only reason I don't believe it is rotors is because it didn't do it with the smaller rims on it.I'm assuming my struts are bad and because of heavier wheels I can now feel itI'm ordering Powerstop brake calipers, rotors, and pads along with new struts. I'm sure the struts have never been changed. I was just curious if you had ever run into this problem before
Mike V.
243 days ago
The only time I've run into the issue is if the wheels weren't torqued properly and it caused the rotors to warp. Sometimes rust can get in between the hub and the rotor and when you tighten the wheel it causes the warpage. This would be why it didn't have it with the smaller rims.
Customer
243 days ago
Good point. I'll just replace everything I said I was ordering. I have to remove struts to put 2 inch lift on for bigger rims and tires so they don't rubThanks for the help
Mike V.
243 days ago
You're very welcome and good luck with this!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
2004 Chevrolet Monte Carlo won't stay running
Hello. Problems such as these can be caused by many things. Anything ranging from a bad vacuum leak, to a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) will cause symptoms such as these. As engine performance problems can many times be...
Window not working
Hello! That is an extremely common issue that owners of your particular vehicle face. The window malfunction is usually caused by corrosion on the window switch. I suggest that the switch be opened and the circuit board inside of it...
Car starts but immediately quits
If you have replaced all of those components and you're still getting issues then the problem should be in the fuse box (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuse-box) with the body control module fuse located in it (on the driver side) or there is an...
Manual transmission makes noises - 1994 Nissan D21
Hello. It sounds like you have a gear, bearing, bushing, or other rotating component issue caused by wear. At that mileage, really the thing to do is just simply rebuild the transmission which is not particularly difficult since it is...
Temperature gauge problem on a 2005 Mercedes Benz S500
Hello - I would first check for problem codes, whether the Check Engine light is illuminated or not. And, if the engine is not really overheating, the problem is most likely the engine temperature sensor (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-temperature-gauge) (the sensor for the...
I have a 2002 Ford F-150 single cab has a rod knock and dies while driving
Hi There, The rod knocking you are hearing in your 2002 F150 may be related to a rod bearing that is beginning to fail. Adding additional oil to the motor may temporarily solve this, but it will eventually come back...
Windshield wipers wont turn on
Hi there. There are many reasons why windshield wipers may not work, ranging from a fuse or electrical relay being blown that powers the wiper module - which relays power from the switch to the motor. You might want to...
SUV has new brake pads and rotors. Making a grinding noise when I brake but, not everytime
This circumstance is not unusual and I suspect is often related to the use of non-OEM rotors and non-OEM brake pad material and also the failure to re-apply factory specified shims and/or appropriate anti-squeal compounds and lubricants. Unfortunately, once non-OEM...
I have a 2006 pontiac torrent all wheel drive my traction control is on it won't turn off what mite be the issue i
Hi Frefdie. Thanks for contacting us tonight. If this warning light came on after a rainy day, then it's likely that you have an ABS or traction control sensor that is damaged or an electrical harness connected to the sensor...
Browse other content
Estimates
Cities
Front end bounces when applying brakes. 07 gmc sierra. I just changed brake pads. I put 20 inch rims on it. It had 17 inch rims before. Didn't have problem with 17s on it. Mechanic's Assistant: How old are the rotors? How ...
Front end bounces when applying brakes. 07 gmc sierra. I just changed brake pads. I put 20 inch rims on it. It had 17 inch rims before. Didn't have problem with 17s on it. Mechanic's Assistant: How old are the rotors? How many miles are on the GMC? 199,000. Not sure on rotors but had no problem until I put bigger rims Mechanic's Assistant: What is the model of your '07 GMC? Seirra 1500 Mechanic's Assistant: Are you fixing your Sierra 1500 yourself? What have you tried so far? Yes. Nothing yet. I'm thinking struts may be bad and bigger rim is causing it. Didn't happen until I put bigger rims on it