The car doesn’t start. I get a code that says incorrect r...
Responses
Chris (aka- Moose)
374 days ago
Welcome to Just Answer I'm Chris aka Moose, I'm sorry you are having problems with your \_. I will do my best to help you get this resolved. If I happen to be helping another or step away during our communication, please know I will follow up as soon as I am back available/online. I try to be online for about 10+ hours a day, midday and late-night shift.
- Key or push-button start?
- With the key on, what is the instrument cluster, check [engine](/topics-engine-ford/) light, odometer, message center, and theft light doing or saying?
- Can I get the code numbers?
Chris (aka- Moose)
374 days ago
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like. I hope what I can provide does help.
A couple of the possible causes can be a weak battery, a damaged code chip in the key, a faulty PATS transceiver in the steering column.
Thank you for visiting Just Answer, I hope I was able to answer your question. If you need to follow up on this concern please use the reply button. If you like my answer please reply so I can mark your question complete. Moose
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Loud grinding noise coming from front of the car.
This could possibly be a wheel bearing failure. Wheel bearings can go dry causing a grinding or growling noise when the wheels are spinning. I would recommend having your suspension system inspected (https://www.yourmechanic.com/services/car-is-making-a-noise-inspection) for any play or faulty parts. When...
Car popped and is now rattling.
The noise you hear may be the flywheel and torque convertor making a rattling knocking noise. The noise may come and go when you put it in and out of gear. If this is the case the manufacturer recommends the...
Car air condition not working; smoke under hood; leaking coolant.
All three of these problems are probably unrelated and may need to be addressed separately. I would recommend having the vehicle thoroughly examined by a knowledgable technician, such as one from YourMechanic, since multiple repairs may be required. The smoking...
Misfiring cylinder
Hi there. There are a couple of different reasons why a single cylinder would be misfiring. A common issue would be a lack of continuity throughout your spark plug coil, wire, and plug. Another problem you may be having is...
What causes the ignition relay fuse to pop when key it's turned to the start position
Hello - You likely have a shorted coil (https://www.yourmechanic.com/services/ignition-coil-replacement) or ignition module. One of the ignition components is pulling too much current blowing the fuse (https://www.yourmechanic.com/services/fuse-replacement). Check the coils and ignition module for shorts or other conditions drawing too much...
I was driving down the road and my truck was running poorly then died. It will crank but not start.
Hi and thanks for contacting YourMechanic. Check the air filter (https://www.yourmechanic.com/services/air-filter-replacement) for it is not dirty. It may sound silly, but if the air filter is dirty the engine will not start up. Starting fluid produces its own oxygen so...
Hello. I live in GA and have an oil leak but the check engine light is off. will I pass emissions? 2005 Volkswagon
Hello - YES, as long as the oil leak isn't causing a misfire and there are no pending codes (Check Engine not on yet), you should be fine. If you are anxious about passing the emissions test, you can always...
I have been using 20W40 engine oil out of ignorant for two years now on my Passat cc But I found out that the right oil is 5W30 or
Hi Justin. Thanks for taking time to contact us today. First off - don't worry, you're not the first person to make this common error. Although higher viscosity engine oil is not always the best way to protect an engine,...
Browse other content
Cities
Estimates
The car doesn’t start. I get a code that says incorrect response from immobilized control module Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? Battery has be...
The car doesn’t start. I get a code that says incorrect response from immobilized control module Mechanic's Assistant: Have you checked the battery, particularly the terminal connections? Are they corroded? Battery has been recharged, replaced O2 sensor as well Mechanic's Assistant: What is the make/model/year of your car? 2013 Ford Escape 1.6L Mechanic's Assistant: Are you fixing your Escape yourself? What have you tried so far? Reset the PCM using FORSCAN replaces bad O2 sensor, charged battery