Q: rotors brake barley done a squally sound starts when I drive but when I brake it stops what could be wrong?

Hi there. If it starts working fine once you restart the car, then chances are it is not the transmission failing. Most of the time, this is caused by a valve sticking in the valve body. They tend to get...

There are a number of things that can cause your ignition to lock up. I am assuming you are speaking of the ignition lock cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-lock-cylinder) which is what the key inserts into. The easy one is to turn the...

Hi there, thanks for writing in. I'd be happy to help. The squeeze clamp may require a flexible squeeze clamp tool to get it off, if you can't get it off with a hose clamp (https://www.yourmechanic.com/article/the-best-tool-to-reach-hose-clamps-by-timothy-charlet). Hope this helps and...

Hi there. I would need to know if, when it will not start, the engine cranks over or you get nothing. If it will not even crank over, then most of the time this is caused by a failing starter....

This kind of a stalling issue can be caused by a variety of problems. They are typically caused by ignition faults, wiring faults, and fuel issues. Although you do not have a Check Engine Light on, you should still scan...

This seems to be a common problem with Dodge, Chrysler, Jeep vehicles. Many of these vehicles have a fusable link wire that goes from the battery to the alternator. When this fusable link fails, the charge from the alternator will...

Hi there - the first task is to check out the overheating issue, which is obviously rather severe. I recommend an overheating inspection (https://www.yourmechanic.com/services/car-is-overheating-inspection) performed by a mobile, professional mechanic, such as one from YourMechanic, who will come to your...

At your car's age and mileage, it really could be just about anything. And since the self diagnostics on the car are not very sophisticated, it's going too take some old-school diagnostic work. If you are behind on any of...

Hi There, It sounds like you may have a faulty cam position sensor that may be causing the jerking reaction (which is normal when the cam sensor begins to fail), resulting in the traction control system to engage. The camshaft...