Q: Engine starts but won’t stay running

The Check Engine light is actually called a Malfunction Indicator Lamp. It’s designed to come on when there’s a problem with any component in your emissions system. That covers a wide range of sensors and other equipment on your engine,...

Depending on how the click noise sounds, it may be a normal engine noise, or it could signify a problem. The green fluid you are seeing is most likely coolant. The leak will need to be found and repaired. I...

Unfortunately, I will not be able to post a picture of this repair. The service manual recommends pulling the engine to perform the repair. YourMechanic does not do this kind of service on your vehicle. I suggest purchasing a service...

It sounds to me like the dealership simply tightened the gas cap and didn't charge you for it nor recorded the transaction. Not to worry though. I don't believe tightening the gas cap would be the proper repair. What you...

Hi there. It does sound you have a broken timing belt. But before you immediately go out to replace the timing belt, the cover should be removed and the belt inspected to confirm that it is actually broken. Even after...

Hey there. As you know, your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS system which is controlled by the car's ECU. When...

Hi there - with the hood open, face the "nose" of the engine (accessory belt end) from the passenger side of the vehicle. The cam position sensor (https://www.yourmechanic.com/article/how-long-does-a-camshaft-position-sensor-last) is behind the timing belt cover on the "nose" of the engine,...

Hi Marie: With regard to the code P1372 that was downloaded, there are many potential malfunctions that will cause P1372 to set in addition to the crankshaft position sensor itself being faulty. And, if the sensor itself is suspected as...

Occasionally, on a part of this type there are meaningful differences between aftermarket and OEM. Therefore, to simplify the diagnostics, the OEM MAF sensor (as vended by a Ford dealer) could be installed. Once you have an original equipment, genuine...