Q: Engine pings

asked by on

The engine is pinging, and I have a possible oil leak.

Engine ping is usually caused by bad spark plugs. Typically the spark plugs become worn out and do not detonate the cylinder at the proper time. I would recommend having a tune up performed by a technician. Spark plugs and wires are recommended for replacement at ~30,0000 miles. It is also possible to get better plugs and wires that will last significant longer.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine pings

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Engine is overheating and heater has stopped working

If the engine was replaced and the AC refrigerant system was drained then the system should be put under a vacuum for a minimum of 30 minutes to ensure all moisture is boiled out and then leak tested to ensure...

Q: Grinding coming from tail shaft area of transmission while releasing the gas pedal traveling 25 miles per hour

Hi there. The grinding sound may be coming from a rear output shaft. In most cases, the transmission yoke or output shaft will wear out over time, or when the inner seal has broken. The grinding is typically due to...

Q: How do I remove heater core in a 1994 nissan pickup

Hello, thank you for writing in. The heater core is a difficult component to get to. Typically, you must go through a lengthy process of accessing the core from behind the dash. Once you have access to it, you can...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.