Q: Driver side headlight buld running light burns out but highbeam,same bulb, works fine. Happend to original bulb to

asked by on July 29, 2017

Driver side headlight buld running light burns out but highbeam,same bulb, works fine. Happend to original bulb too

Headlight Bulb Replacement $93.60 - $1457.26 Get a Quote

The voltage supplying the bulb can be checked. If the voltage is too high, that can shorten bulb life. If the voltage is acceptable, and the light bulbs are failing prematurely your only option really is to use a different bulb vendor and see if the service life is improved. If you desire that a certified mechanic test the circuit, please request bulb inspection/replacement and the responding certified mechanic will get this taken care of for you. If you have further questions or concerns, do not hesitate to re-contact YourMechanic as we are always here to help you.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

I bought a vehicle about four months from a supposedly auction dealer and he keeps giving me a fake bill of sale. He also never ga

This sounds like its time to contact a lawyer or a friend that is a lawyer that will help you call this guy and threaten lawsuit if he does not comply.

Growl Noises when breaking

It sounds as if the noise you are describing is probably coming from the brake pads being worn out. The friction material of a brake pad is mounted to a steel backing plate, and when the friction material wears out,...

2003 Kia Sedona starts and runs for one minute then dies. Restarts and does the same thing. Threw a code the other day of cylinder

Hello. Thank you for writing in. At first the issue sounds like an electrical problem. There are a number of sensors that will cause the engine to stall. Some of them are not monitored by the computer and will not...

Why won't it start with a low battery and a good jump start connection?

Hi, thanks for writing in. Your battery may not have had enough cold cranking amps (CCA). The volts may be correct but if it doesn't have enough CCA, it will not start for you. Batteries that specify cold cranking...

My actual handle isn't broken. It's Just won't open

The door handle inside a vehicle of your year and model uses a mechanical linkage to transfer the force applied to the handle then to a device that unlatches the door at the jamb. The linkage inside the door may...

Multiple leaks in main gasket

Hello. If the leaks are coming from where the engine and the transmission come together then you have a rear main seal leaking or a front pump seal in the transmission. The transmission needs to be removed in order to...

Backlighting to the dashboard failed now it’s distracting

This actually may be a normal condition. The alternator on your car has a specified amount of amperage it can output at a given engine speed. For instance, your alternator's maximum output is approximately 125 amps, but only 85 amps...

Related articles

8 Best Affordable Sports Cars
Drive like you mean it: 8 sleek, fast, and affordable sports cars worth the look and speed.
B1993 OBD-II Trouble Code: Driver Side Side-Mount Air Bag Circuit Short to Ground
Trouble code B1993 means that the PCM received a voltage signal from the side-mount air bag circuit. The SRS warning light may illuminate.
How to Replace a Coolant Reservoir
A coolant reservoir is at fault if coolant is leaking underneath the vehicle or if the coolant sensor remains on all the time.