Service AWD light came on. after turning off and on it's ...

Service AWD light came on. after turning off and on it's gone now. Mechanic's Assistant: Is the [battery](/topics-battery-dodge/) fully charged? Does the light stay on while you're driving? It was on for about 5 mins. i p...

Service AWD light came on. after turning off and on it's gone now. Mechanic's Assistant: Is the [battery](/topics-battery-dodge/) fully charged? Does the light stay on while you're driving? It was on for about 5 mins. i pulled over and turned the car off and on and it went off battery is charged Mechanic's Assistant: What is the make/model/year of your car? 2013 dodge durango v8 5.7L Mechanic's Assistant: Are you fixing your Durango yourself? What have you tried so far? Well the light is off right now and everything is working fine, i was just concerned about it being serious Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? That's basically it

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know.I appreciate your patience and will provide responses as soon as possible.Thank you. this is known to happen if the front axle actautor is wearing out or the wiring to the connector for it is damaged. so if it comes on and remains on, then that is what needs to be looked at.

Okay i will keep an eye on it. Because right now it's off and everything is back to normal it only did it once and went away after turning the vehicle off and on.
Automotive Expert
ok, and thats a sign of the conditions I mentioned. we have run into this a few times.

Okay thanks, \*\*\*\*\* \*\*\*\*\* happens again then i will look into fixing it.
Automotive Expert
very good. please stay well

What others are asking

How do I reactivate the auto-up and auto-down features?
The auto-up and auto-down features allow you to entirely roll up or down a power window with one press of a button. Sometimes the auto-up and auto-down functions stop working, and need to be reactivated. To do this, pull the...
How do I use the odometer?
The odometer tells you how many total miles your vehicle has driven. It is displayed on the instrument panel by pressing the Sel/Reset button until the information display switches to the odometer.
Timing chain tensioner rattling on a 2003 Audi A4
Yes it does, but it should never rattle of course. The problem with yours is that the timing chain probably needs to be replaced because it has too much slack there or in the tensioner. Changing the timing chain is...
Where is the mass air flow sensor located on a fiat 2013 500. 1.4 engine?
The mass air flow sensor ( is located just near the intake or throttle body and connected to the air filter. It should have a wire connector plugged into it that comes from the ECU.
I had a trouble code P0090 and now I have P2177
This may not be very hard to solve. Code P2177 ( means your engine is running too lean. The most common cause of this is an air leak in the intake system. Since you've just been working under the hood,...
Heater blower surge
Hi There, It sounds like you may have a faulty blower motor resistor. Blower motor resistors ( are used to control the fan speed of automotive blowers. The fan speed can be changed either by switching the blower resistor resistance...
Why are my warning lights on in my 2007 Nissan Altima
Hello. These lights can come on for a number of issues. It can be from a failing battery, a bad sensor, a computer problem, or a number of other issues. The computer needs to be scanned for codes first in...
Scraping noise
Sometimes its easy to get the hardware in a little crooked when changing brake pads, that or a backing plate might have gotten bent. Take the car back to the guy who did your brakes, they should be happy to...
I drive 2005 crysler 300. When I drive my car, I feel like driving on rumble strips. It does not happen every time but it happens
Tire defects, tread separation, wheel/tire imbalance, strut/shock absorber failure, and other faults can cause the rumbling and vibration that you describe. To pinpoint the cause of the problem you can request a vehicle inspection ( and the responding certified mechanic...