Q: How do I reactivate the auto-up and auto-down features?

asked by on

How do I reactivate the auto-up and auto-down features?

The auto-up and auto-down features allow you to entirely roll up or down a power window with one press of a button. Sometimes the auto-up and auto-down functions stop working, and need to be reactivated. To do this, pull the windows switch up all the way, and hold it there; after the window has rolled up entirely, hold the switch for an additional two seconds. Then push the power window switch all the way down; after the window has rolled down entirely, hold down the switch for two more seconds. Now the auto-up and auto-down features have been reactivated.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I reactivate the auto-up and auto-down features?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: When replacing ball joints can you just replace the ball joints or do you have to replace the whole control arm?

The ball joint on this vehicle can be replaced separately from the lower control arm. However, on this vehicle it is also a known problem where the ball joint becomes loose inside the mounting in the lower control arm and...

Q: How do I use the Uconnect system to make a phone call?

The Uconnect system is a Bluetooth-connected system that allows you to use your cell phone through your vehicle’s audio system. It is a hands-free, voice-operated system that lets you safely operate your cell phone while driving. Making a phone call...

Q: Is there anything else that causes accessories not to work besides a fuse besause I changed one bad fuse & still not working

The systems that are not working are powered through the battery saver relay actuated by the body control module. If one or more item shorted and blew out the fuse then no item will work. Check to make sure the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.