Q: How do I use the odometer?

asked by on

How do I use the odometer?

The odometer tells you how many total miles your vehicle has driven. It is displayed on the instrument panel by pressing the Sel/Reset button until the information display switches to the odometer.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the odometer?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the Trip 1 or Trip 2, Average Fuel Economy, Average Vehicle Speed setting?

The driver information center (DIC) is able to provide a lot of information on the uplever cluster. You can change which information is displayed at any time. The most common display setting for the DIC is Trip 1 or Trip...

Q: Q: How do I insert a CD?

The most important thing when inserting a CD is to make sure that the CD is facing the correct way. Make sure that the top of the CD (the painted side) faces upwards, and then push the CD into the...

Q: What does the Low Oil Pressure warning light mean?

The Low Oil Pressure warning light is located on your instrument panel. When the light illuminates, it means that your engine has low oil pressure, which could be due to insufficient levels of oil, or a leak in the system....

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...