Q: Clunking in front end of car.

asked by on

I can hear a clunking in the front end of my car when going over speedbumps and uneven sections of road.

This could be a lot number of things. A few prime suspects are the sway bar end links, control arm bushings and struts. A trained professional, like one from YourMechanic, will be able to diagnose your noise in person.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Clunking in front end of car.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where is transmission speed sensor on 07 Lincoln MKZ?

Hi there. It is common for 2006 to 2010 Ford / Lincoln transmissions to have problems with the TSS and OSS harnesses. It's attached to the side of the transmission and is very difficult to get to without removing multiple...

Q: Q: Oil pressure low

The oil pressure light will illuminate whenever the issue has been detected by the maim computer. If the car is started and the issue hasnt occured yet, the light may come off and on as the issue is detected. Start...

Q: I have a new fuel pump and there is no fuel to the engine

Hello and thank you for contacting YourMechanic. A plugged-up fuel filter will cause an engine not not start. Get a fuel pressure tester and hook it up to the fuel rail. There should be a shrader valve on the fuel...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.