Q: Carburetor issues with jeep.

asked by on

The jeep starts, but then dies. I think it might be the carburetor.

I would ask for help from one of the experienced mechanics at YourMechanic. They have the experience and tools need to properly diagnose what is causing your jeep to stall out after starting.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Carburetor issues with jeep.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Vehicle will start but turns off when put into gears

Hello, thank you for writing in. When the transmission is put into gear, the engine is demanded to work under slightly different conditions. It is these changes that are likely triggering the engine to stall. The Torque converter lock up...

Q: Trying to get it started after sitting for five years

My previous comment about timing was in reference to starting the firing order with the correct terminal on the distributor cap. If you have the number one plug wire on the incorrect terminal to start the firing order, this is...

Q: Gauges don't work

Hello. There are a few reasons for the gauges not working. I would start by checking the fuses. If the fuses check out, then the grounds should be looked at. There is the connection at the battery and another under...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.