Q: Q: Car turns over but won't crank.

asked by on

Can an ignition switch recall for fire hazard have anything to do with why my car will turn over but not crank when the recall was 12 months ago and I never had it done.

My car has 143200 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Car turns over but won't crank.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Speedometer speed display problem, possible skipping

You will need to take it to the dealer for them to flash the engine control module (ECM) per technical bulletin 18-001-08. A reprogram is needed to correct the ECM programming for the proper cluster speed readings. You have to...

Q: Car floods bad when cold. If I give it a little gas it jumps and jerk and if I mash it on down it takes off. I've replaced the O2 sensor and coolant temp sensor.

This may be related to a dirty or faulty idle air control valve. This is a unit that reads the air intake at low or idle speeds and relays this information to the computer which then makes adjustments to fueling....

Q: Accelerating causes ticking noise.

A ticking noise indicates a worn valve lash adjuster that is dirty and needs cleaning or needs to be replaced. These are the lifters that ride on the camshaft and provide lift for the valve. They are spring loaded and...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...