Q: Car stalls when i floor it

asked by on

Car stalls when i floor the gas even when im out of gear. If i accelerate gently or with high rpm i can avoid this.

My car has 180000 miles.
My car has a manual transmission.

The loss of power is ue to a clogged fuel filter or fuel pressure is too low. Have fuel filter replaced and pressure checked and problem will be isolated to one or both the clogged filter and fuel pump.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car stalls when i floor it

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I have a new fuel pump and there is no fuel to the engine

Hello and thank you for contacting YourMechanic. A plugged-up fuel filter will cause an engine not not start. Get a fuel pressure tester and hook it up to the fuel rail. There should be a shrader valve on the fuel...

Q: Q: Car won't accelerate after 10 miles

Hello. It is more likely that the cause of this problem is that the catalytic converter is clogged which would cause the car to not to accelerate once becoming warm. There could also be a problem with the transmission. Your...

Q: a lot of play in rear axle.

Hi there. The rear end pinion engages with a ring gear and the other end of the pinion is supported on a tapered roller bearing. If there is any radial play in the pinion or axles itself, there is a...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.