Hi, i have holden cruze 2010 model. Engine warning light ...


Hi, i have holden cruze 2010 model. Engine warning light comes on the dashboard. what does it mean? Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? You mean on the fuse box Mechanic's Assistant:...

Hi, i have holden cruze 2010 model. Engine warning light comes on the dashboard. what does it mean? Mechanic's Assistant: Have you checked the fuses? The dashboard bulbs? You mean on the fuse box Mechanic's Assistant: What is the model of your '10 Holden? 2010 model Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Last time have warning with t/c and engine warning light engine is vibrating Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I change voil and all spark plug Engine runs smoth after that

Automotive Expert
Hello and thank you for using JustAnswer. My name is\*\*\*\*\* am a vehicle master tech located in the UK and I will do my best to assist you. During this conversation, you will be given an automated offer for a phone call. You may accept or decline that offer. I don’t personally offer this service so if you take this another tech may call I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible. Can I first ask who i have the pleasure of speaking with today please?

I fixed the problem on the coil and spark plug but engine light still on. That the only problem that i have on my holden cruze 2010 modelOh you want me to pay $39?
Automotive Expert
If a fault was detected in the system it will not clear the warning on its own. The car will need to be plugged into a diagnostic scan tool to clear the faults from the system and reset the warning. The car is most likely still triggering the warning for the running issue you have rectified and unfortunately, it will not reset without being told . Thanks for choosing JustAnswer and please let me know if you have any further questions at all.

What others are asking

Truck overheating
Check to see if the cooling fan clutch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fan-clutch) is fully engaging when the engine is heating up. You can test this by putting a tissue in front of the radiator or condenser to see if the fan flow is...
Radio does not work and speakers make popping noise when car is not running
The whine you hear is likely from a bad ground or a shorted wire. Make sure all the wire ends are insulated, so they do not touch anything. If the vehicle had a premium sound system, you may have an...
the car is loud when I test drived it. When I accelerate it almost choked but overall runs fine, may just be muffler?
Hello. It could be possible that the symptoms the vehicle is showing are due to an exhaust leak. An exhaust leak will usually cause increased exhaust noise, and if large enough or if the engine load is heavy enough, can...
The only way I can deactivate the alarm at this moment is by turning on the car.
Hello, thanks for writing in to YourMechanic. Most cars support a "reset" mode for the alarm that works as follows: close all doors and lock the car with the key in the drivers door. After 2-3 minutes, unlock the driver...
Hesitation between 40 & 50 mph.
After scanning the computer for codes to see if there is codes for the transmission or EGR system. If no codes then you should disconnect the EGR vacuum control valve and road test to see if problem of surge continues....
I have a p0174 code that was reviewed on a scanner.
Hi there. The code P0132 in on for an issue with the upstream oxygen sensor. There could be a broken wire, frayed wire touching something metal, or the sensor could have failed. The code P0174 is on for the Mass...
Would a bad crankcase valve caused by a tune up on my audi a3?
Hi Lisa. Thanks for contacting us today. Having a tune-up would not likely cause damage to a rear crankshaft seal. This typically occurs over time and is due to common wear and tear. It's a hit or miss type of...
I put my car in park then tried to put in drive and it was in reverse all of gears are in reverse and wont show gear on dash.
Check to be sure that the manual lever on the top of the transmission actually moves into each "detent" position, beginning with the park position, as you move the gear shifter. In all likelihood, the manual lever is not moving,...