Popular questions

Hi Trond. Thanks for contacting us tonight. Newer cars today are built for longevity - as opposed to performance. As such, an automatic transmission will shift more efficiently in "D" as opposed to the manual shifting option. Overtime, manually shifting...

Hello. Usually transmission popping noises are caused by issues with the transmission, however there are many possibilities. The first thing I would check, is to see if this vehicle has a dipstick that allows you to check the fluid. I...

The anti-lock brake system (ABS) on your car is designed to help ensure that you’re able to maintain control of the steering when you slam on your brakes. It’s a hydraulic system and supplemental to your main brake system. ...

This can be caused by a number of things such as low coolant levels, a faulty thermostat, or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning...

The airbag system will keep the light on until the entire system is working properly and then codes are cleared. The fuel pump inertia switch on the car will need to be reset if it got tripped.

Hey there. It sounds like you may have a major electrical issue with your vehicle. This could be a short of some kind or a computer going bad. I would recommend enlisting the assistance of a qualified professional who is...

Yes, this is something one of our mechanics is able to do and is highly recommended. As you know, with any car the life expectancy of it depends largely on the maintenance schedule the owner has maintained, the driving conditions...

If the window can't be operated from either the master switch (on the driver side) or its own switch, chances are the motor has failed and needs replacement. I would suggest having the whole power window system tested by a...

Your vehicle uses two serpentine belts: one for the accessories and one for the A/C. I have known the A/C belt tensioners to fail on these vehicles, causing damage to the belt. There is also a technical service bulletin (TSB)...

The backfiring and the rough idle are probably related. Backfiring is often caused by a too lean or too rich air-to-fuel ratio although a few other causes are discussed below. A backfire in the intake manifold is caused by a...

Hello and thank you for contacting YourMechanic. If the radio is a stock radio and not an aftermarket radio, then the lights should be tied into the dimmer switch. Turn the dimmer switch to adjust the lights and see if...

Hello, it sound like the bearing or wheel was not installed correctly or has become loose. I would recommend not driving the vehicle since this created a hazard. I would take the vehicle to the shop that performed the repair...

It starts with starting fluid. That means that the ignition system is working, so you most likely have a fuel system problem. What you want to do is pressure test your fuel pump. You can get any mechanic to...

The transmission may have additional problems and should be scanned for additional codes first. If there are additional service codes then you will need to have those codes diagnosed. The vehicle should not move in neutral unless it is pushed....

Hi Linda. Thanks for contacting us tonight. Typically, water leaking from the water pump location is an indication of damaged inner seals, which means the pump is damaged. It's recommended to replace the water pump when this happens.

The suggestion that it sounds like a diesel is a little scary. before you try anything else, be sure to check the engine oil. After that, check under the hood for vacuum lines or any other air fittings that may...

Hi Ugochukwu. In order to get rid of any error code, you need to first discover why it was triggered in the first place. The P0430 code is set when the ECU detects below threshold performance from the catalytic converter....

Toyota recommends changing the engine oil and filter on the 1999 4 cylinder Camry every 12,000 kilometers. Changing the oil, and performing other maintenance, using a mobile service such as YourMechanic, can save you a lot of money. If you...

Hello. Your vehicle is not equipped with a separate flasher. This is built into the SAM module which controls the lighting.

Hi there. When a car will start then die, it is usually caused by one of two items. First, existing fuel system components are dirty or clogged with excessive carbon deposits, or one of the components of the EVAP system...

Any number of components can cause a stalling issue. It can be as simple as a vacuum leak, to as severe as an engine control unit or more. If there is a vacuum leak caused by a broken intake hose,...

Hi there - the knock sensor on this engine is under the intake manifold, just behind the power steering pump, and is best seen and accessed from underneath the car. For assistance with a replacement, have a knock sensor replacement...