Popular questions

Hello - from your description of symptoms, I believe you have worn steering or suspension links in your front suspension. The need to "correct" when turning indicates that something in the steering components is shifting, which should only occur with...

Hey there, thanks for writing in about your Dodge B250. If the vehicle runs better when above half a tank, the pick up tube in the fuel tank may be broken or disconnected. Replacement does involve replacing the fuel pump....

Hi there. The year, make, model, and mileage usually helps. However, I can provide you with some direction on your concern. If you're experiencing a wet spark plug, there could either be no spark on that plug or a leaking...

If you are not using OEM pads, rotors and shims, that can account for the squealing. If you want to attempt to resolve it as is, Permatex Disc Brake Quiet (Part No. 80729) might work. Use that compound sparingly though...

Hello. These are two separate issues as the brake pedal is a hydraulic system operating with brake pads and rotors and the e-brake is a brake cable that leads to a brake drum assembly. First, lets address the brake...

The problem sounds like the steering rack and pinion is noisey and grinding internally and may need replaced. This can cause erratic steering control.

Claimed by Jeff Engstrom

If your radiator is leaking, it will cause your car to eventually overheat. If left for too long, major engine damage could occur. I recommend making an appointment with a mechanic, such as one from YourMechanic.

Hi there. This could be normal operation, but the cooling fans could be starting to have issues. Perform a visual inspection of the cooling fans to make sure when they come on that they operate properly; they should move a...

Hi there. It sounds like there could be the possibility of a low cooling system level. Check the level when the engine is cold and add as necessary. When you turn the climate controls to heat the inside of the...

Hi, thanks for writing in. I'd be happy to provide my insight. This may be clutch-related if the clutch plates are worn or could possibly be worn out or damaged gear synchronizers. These are small fork shaped components in your...

A cooling system that keeps getting low on coolant in a short amount of time has an active leak in the system. If the leak cannot be found externally then the leak will be internal to the engine. You will...

You did not mention the model of your vehicle. The noise may be coming from the tires. You should have your tires rotated and balanced first to see if this helps the problem. Since your vehicle is pretty new and...

You will need to have the computer scanned to see if there is stored codes for a sensor problem. You may have a theft system activated and it will cause no starts also or the computer is not turning on...

The connections between the battery and alternator need to be inspected. There are also a few ground connections between the battery, engine block, and frame which, should also be inspected. There is also a chance that you received a bad...

Having that many codes that go to one component may want you to quickly condemn the ECM. However, the vehicle should not have the ECM replaced until one or more of the codes retrieved calls for the replacement of the...

Hello - the lack of acceleration or speed over 20kpm is classic behavior for a failed throttle position sensor. I would find out specifically what codes are now being set before spending any more money on parts or repair. Most...

It is possible an independent mechanic may be able to devise a fix for the wiring issue that the dealer would be restricted from doing as it may require modifications. One thing to consider though, modifications to the truck may...

Hello. The brake pedal going to the floor is a common symptom of a faulty master cylinder. The master cylinder will usually fail due to an internal or an external leak. In your case I believe the leak is internal...

Hi there. It sounds like a blown fuse that supplies power to the accessories. Check all the fuses and replace as necessary. Recheck to see if the operation is as specified. There could be a short circuit if the fuse...

The door seal is known to hit the trim panel on door closure. This can cause high effort to close the door. The fix is to remove the door seal and adjust the panel fold inward and reinstall the door...