Q: Where is camshaft located on a 2008 Infiniti g35 x

While many vehicles have a combined engine and transmission monitoring system that will turn on the Check Engine light if a problem is detected, your Fusion actually has a separate light for transmission and drivetrain problems. It looks like a...

There are several causes for an overheating issue. The most common is low coolant levels, due to leaks or evaporation over time. If there is not enough coolant in the system It will overheat. Another common issue is a faulty...

Your engine management system is going into "limp mode" when the Check Engine light is illuminated, reducing engine power, and quite likely, leaving your automatic transmission in 2nd gear. This is why you are experiencing greatly diminished performance. Turning your...

Hi and thanks for contacting YourMechanic. With having the intake manifold bolts broken, yes you can smell gas, but the vehicle will have a vacuum leak. The O2 sensor is on for the broken bolt due to the vacuum leak....

Hi there. It may be, play in the wheel bearing hub assembly (https://www.yourmechanic.com/services/wheel-hub-assembly-replacement) causing the squeal while turning a little to the left. It could also be, the brake pad wear indicator/sensor touching the brake rotor while turning a little...

Hi there. The oil pan gasket could take from 1.75 to 2.50 hours depending on the technician that is working on the vehicle. If you are not a mechanic and are wanting to change the oil pan gasket and have...

Hi there. In general, engine performance and the traction control issues you have described are not related. The crankshaft position sensor would cause misfiring or an inability to start; but in general, typically does not cause bogging or acceleration problems....

Hi Matthew. Thanks for contacting us tonight. You can learn more about these trouble codes by clicking the blue links - P-0134 (https://www.yourmechanic.com/article/p0134-obd-ii-trouble-code-o2-sensor-circuit-no-activity-detected-bank-1-sensor-1-by-jamahl-walker) and the P-0140 code (https://www.yourmechanic.com/article/p0140-obd-ii-trouble-code-o2-sensor-circuit-no-activity-detected-bank-1-sensor-2-by-jay-safford). In regards to taking them seriously, any OBD-II trouble code indicates a...

To determine the exact fault, as well as why this has occurred, the vehicle will have to be inspected first hand. There are too many possibilities, and too many components to inspect, to speculate without seeing exactly what you have....