Q: Where are the vanity mirrors?

Hi, the problem could be a bad sensor. I would recommend replacing the oil pressure sensor. To do this, disconnect the battery and locate the pressure sensor,remove old pressure sensor and replace it with the new one. Finally, reconnect the...

Hello. The first thing to check is all the fuses. If all the fuse are good, a scanner needs to be connected to car to check for code and data. Everything in the column and steering wheel goes through the...

There are several parts that when they fail, will cause the engine to stall and not restart. The crankshaft position sensor, ignition control, module, and the fuel pump. The first two will set trouble codes in the computer to aid...

Yes it is and you should change it right away, because mileage is mileage and time is time. That baby is 15 years old. They tell you that you are supposed to change the belts and they are only good...

Since the noise appears to occur while turning, I would have your mechanic check for a loose or failing accessory drive belt (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) (often called a 'serpentine" belt). Turning puts more load on this belt, and it may be slipping....

This is a common sign of a failing starter solenoid. The starter solenoid is located on the starter and has internal electrical contacts that transmit electricity to the starter. When this fails, it may cause a clicking sound and will...

Hello. Was the A/C working properly before you had the condenser replaced? Your previous mechanic was correct that the condenser was likely the source of the issues. Now that the condenser has been replaced, we know its working and can...

There are two principal possibilities: faulty motor/transaxle mounts, or an engine operating or mechanical condition including the possibility of a faulty harmonic balancer. To obtain a conclusive diagnostic, please simply request an engine vibration diagnostic (https://www.yourmechanic.com/services/engine-is-shaking-pulsating-or-vibrating-inspection) and a certified Mechanic,...

Thumps and clunks can be hard to diagnose from a desk. Particularly in a car with that many miles where anything could be wrong. It may be that you have a motor or transmission mount that is going bad. or...