The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
I went through all the technical bulletins (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-by-parker-hill) and recalls (https://www.yourmechanic.com/article/how-to-check-if-your-car-has-recalls) and did not find anything for reprogramming your computer or repairs to the TPS or throttle body. The ones that you are not finding may not be the right...
Hello. Depending on what engine you have, the type of transmission in the van, and which mount you are replacing will determine the mount replacement procedure. You may have to drop the subframe to remove the mount you need to...
Hello. The MAP sensor reading on a scanner should read about 1.0 to 1.5 volts at idle and 4.5 to 4.8 volts at wide open throttle. The MAP should read 4.8 volts or more when you have the key on...
The GEM module can only be scanned using a scanner capable of accessing the GEM module through the OBD2 data link. The scanners that the Ford dealer uses can access the module. There are aftermarket scanners on the market than...
Hey there. The first step to take is to consider all of the repairs that have been made recently. If you have already performed anything I am about to discuss, then you can ignore that for the time being. You...
Hello there. A few common problems will cause your 1996 Nissan Maxima to cut out when it is put in gear and have a rough idle. The idles issues and cutting off could be related or separate issues. Likely causes...
Hi and thanks for contacting YourMechanic. If your engine was making a loud noise and when the engine was throttled up, there is a possibility that the engine may have a connecting rod that could be knocking and getting ready...
Hi there. This type of symptom is commonly caused by power steering fluid that is low, damage to wheel bearings, or other suspension components. If the steering wheel feels "heavy" when you turn, it's also possible that the steering stabilizer...
Without seeing the quote to see all the work that will be performed I would say you need to have a second opinion and quote from YourMechanic. Contact the customer service to get your quote. The quote you got sounds...
2009 2009 marked the end of the very short life of the Mazda Tribute Hybrid. All told, the automaker produced fewer than 700 models, and it was ultimately retired well before the Tribute itself ceased production in 2011. For the...
Over Over the past several years, Buick has returned to form when it comes to luxury sedans, and the 2012 Buick LaCrosse is a standout even when compared to some of the other big names in luxury. Key Features The...