Q: What does the StabiliTrak off light mean?

asked by on

What does the StabiliTrak off light mean?

The StabiliTrack off light is located on your instrument panel. When the StabiliTrack system has been turn off, the StabiliTrack off light will illuminate. Tip The StabiliTrack of light will briefly illuminate when the car is turned on. When the engine is turned on, the light should disappear.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the StabiliTrak off light mean?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Abs, brake, and vsc warning lights

Hello. Most of the time if the vehicle is running fine and the lights just came on then you more than likely have low brake fluid. If the fluid level is low then all of these lights will come on....

Q: What does the Eco Mode On message mean?

The Eco Mode On message can appear on the driver information center (DIC). When the DIC displays this message, that means that the fuel economy mode has been activated.

Q: Misfire on cylinder 1 causes spark too rich or lean fuel levels

Hello there, the P0301 Cylinder 1 misfire is a common code on your 2002 Chevrolet Trailblazer. When a misfire code is seen it is telling us that the cylinder is not firing as it is supposed too. This means the...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...