Q: What do i do if the ABS indicator light and the Stability Control light both stay on?

asked by on

on my dash bored the abs lights stay on and the Stability Control light stay on also. the AvanceTrac on my system keeps on popping up

My car has 5000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What do i do if the ABS indicator light and the Stability Control light both stay on?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: The fuel pump and dashboard lights indicator shut off after the 4 wires in the neutral safety switch shorted out

It sounds like you may some blown fuses from that shorted switch. Inspect the fuses and replace as necessary. An electrical wiring diagram and a digital volt/ohm meter will be needed for further diagnosis if replacing the fuses does not...

Q: Replaced throttle body high idle

Hi There, As you may know, after cleaning the throttle body your car needs to go through a "re-learning" process to bring the idle back down. Try doing the following which should bring the idle back down to a normal...

Q: AC will only blow air on defrost and not on vent.

Hello, on this particular model of vehicle they have whats called a blend door actuator in the HVAC unit under the dash. If it doesn't switch from defrost to front air, this is probably your issue. This repair is very...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.