Q: Water pump

asked by on

Can I replace the water pump without interfering with timing belt.my timing belt is good..

My car has 130000 miles.
My car has a manual transmission.

You do not have to remove or replace the timing belt in order to replace the water pump.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Timing chain bad?

You may need to replace the tensioner, timing chain, and guides for the timing chain itself. Firstly, I would recommend having the oil pressure checked to make sure it is within specifications. The tensioner and guides may be worn or...

Q: Loud noise from 2nd gear up

What you are describing is a noise that a wheel bearing makes when it is worn out. They usually last about 100,000 miles. This part will not affect acceleration or engine temperature. They do however will change pitch, get louder,...

Q: Clutch pedal goes down without resistance

Hello. If your clutch pedal goes to the floor and won't return up, your clutch master cylinder or slave has failed, or you have a leak. If you can see that the reservoir for the clutch is full, then the...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...