Q: Transmission not working properly

asked by on January 26, 2016

What do I need to do to have the following codes fixed: P0133, P0410, and P0301?

Check Engine Light is on Inspection $79.99 - $99.99 Get a Quote

Hi. P0133 is a code for the oxygen sensor bank one sensor. P0410 is a code for the secondary air injection system malfunction and a P0301 is a code for a misfire on cylinder 1. I would suggest having a certified mechanic, like one from YourMechanic, inspect the vehicle’s trouble codes to pinpoint the faults your vehicle has.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Front seal leak in minivan's transmission - 1997 Ford Aerostar

Hello. It sounds like your transmission either did not get completely full of fluid after the service or it is leaking fluid again. To check the transmission fluid, start the car and leave it in park. Next pull out...

Car not moving once in gear

Hi. This transmission has many technical bulletins for upgraded. The internal transmission gears and springs could be causing your problem. The transmission would need to be inspected and possible replaced or overhauled with major mechanical parts. I recommend you have...

How do I delete my text messages from my 2017 Nissan maxima?

Hello, thank you for writing in. Most vehicles are not able to delete the messages from your phone. The vehicle is pulling that information from the phone, but it cannot access those types of features. To remove the message from...

Window fell down

Either the window has fallen off its track and/or the regulator has failed. When the window switch is pressed, power is sent to a DC motor. The motor is attached to a scissor-type device called the regulator, which lifts the...

Transmission has a constant loud & annoying hum

Hello. You are correct that this is not normal, but Acura does not have a fix for it. This is a design flaw in the powertrain. Your only form of recourse on this is to contact their national customer service...

Car overheats while idling

It sounds like you may have a problem with rust an scale build up in the engine. This build up may have worn the impeller on the water pump and this is why it only overheats at low engine RPMs....

Jerking and violent shaking when accelerating. Cvt engine, Nissan Murano 04

It is possible that you could be having an issue with your transmission. I would recommend having your transmission inspected by a qualified transmission specialist to determine the exact cause of this issue. The same as normal Transmissions and therefore...

Master cylinder going bad

The master cylinder may be going bad if you notice the pedal going down to the floor with no signs of any brake fluid leakage, or if the master cylinder is leaking fluid from the back of it into the...

Code B11E5

Hi there. This fault code indicates a failure in the circuit for the left HVAC damper position sensor. This fault can be connected to the operation of the left temperature blend door. Have an experienced technician inspect the electrical components...

Related articles

Honda Certified Pre-Owned (CPO) Car Program
If If you have been shopping for a used Honda vehicle, you may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on...
How to Know When Your Transmission Is Not Working
Most vehicles use some sort of transmission to transfer the power generated from the engine, into usable power that can turn the wheels....
Is It Safe to Drive With the Transmission Temperature Light On?
Most people don’t know very much about vehicle transmissions, and realistically, why should they? All you want to do is get in...