I have 2 issues. The first is a trouble code p0102 along ...
Responses
Chris (aka-Moose)
231 days ago
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day.
- I can help with the codes and the warning light.
- On the warning light, I assume your scan tool cannot access the ABS module to get those codes?
Chris (aka-Moose)
231 days ago
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like in my answer. I hope what I can provide does help.
The codes most often indicate the MAF sensor is faulty, dirty needing to be cleaned or the wiring to the MAF sensor has a resistance issue.
Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Heater only working part of the time.
We need to determine if your blower is blowing air or if the air coming out is not hot. If you feel heat coming through any of your vents, even a tiny trickle of heat, then your heater core is...
Getting codes for misfires and a failed heat sensor
The codes listed indicate that your vehicle is running lean, and that there is a problem with the air fuel ratio sensor's signal and heater circuit. These are probably related to the misfire that you are experiencing. I would recommend...
Issues with MAF sensor and P010B code
The vehicle's Engine Control Module (ECM) (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-control-module-ecm) may need reprogramming, as to a technical bulletin ITB09-028 dated June 3, 2009. The reprogramming by the dealer will be needed to try and see if the code goes away, if not, further...
temperture sensor
VW / Audi has had lots of "issues" with sensors in the early 2000 model years. 2003 is one of them. The coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) is one of the most common. While it's not unusual for a coolant temperature...
partially engaged brakes
You will need to jack up the front wheels and see if the tires will turn freely. If both front wheels are binding then you should try to loosen the brake lines that connect to the master cylinder to see...
Ran car empty the other day, so I stopped at Wal-Mart for gas, car shut off 2014 VW Passat
Hello - it is possible that you were close to being completely out of gas when you first stopped for fuel. The fuel lines may have had some air in them, and your initial startup attempt (at Walmart) did not...
Transmission fail safe program message came on the dashboard.
Hi there. The fail safe light is on for something went wrong with your transmission. The light comes on to warn the driver that there has been an issue with a system and causing the circuits to malfunction or shut...
Engine automatically turning off after letting it warm up.
Hi There, It sounds like you may have an ignition coil pack beginning to fail. When the engine shuts off, it is normal for the lights in the dash to light up and then turn off again once the engine...
No reverse seems to be stuck in second gear
If the vehicle is in gear (moving) while the shift selector is in park that means the shift lever adjustment is off. There is a lever on the transmission that operates the manual valve and that lever has to be...
Browse other content
Services
Estimates
Cities
I have 2 issues. The first is a trouble code p0102 along with p0113. The second is my trac light comes on and off as I'm driving specifically at 30mph Mechanic's Assistant: Just to clarify, what are the exact lights you're...
I have 2 issues. The first is a trouble code p0102 along with p0113. The second is my trac light comes on and off as I'm driving specifically at 30mph Mechanic's Assistant: Just to clarify, what are the exact lights you're talking about? My check [engine](/topics-engine-toyota/) light is on. And my traction control light comes off and on Mechanic's Assistant: What is the make/model/year of your car? 2018 toyota tacoma sr5 v6 4x4 Mechanic's Assistant: Are you fixing your Tacoma yourself? What have you tried so far? I put my code reader on the car and got the codes p0102 and p0113. I removed and cleaned the MAF sensor and put in a new [air filter](/topics-air-filter-toyota/). I also tested the sensor and got 3.4 ohms cold