Q: Q: The fuel pump is not getting power

asked by on

I have put a new fuel pump in and it will crank but not start put a new relay in same thing cha ged the oil pressure sending unit still does the same thing unplugged the battery to reset the computer what else could it be I need help on this

My car has 135000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: The fuel pump is not getting power

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My 89 ford ranger runs everything works but it will shut off and will not start again for day or two. Everyone says eec power rela

The problem sounds like the fuel pump or fuel pump relay is bad. If you turn on the key and the check engine light is on then the EEC relay is good. You should hear the fuel pump in the...

Q: How to know if my head gasket is blown

Hello. The white smoke coming out of the exhaust is a sure sign that the head gasket is blown or the head is cracked. This engine is very common to have cracked heads between the valves when the engine has...

Q: When I fuel up, my car will not start, it takes about 3 tries and I have to pump the gas

Can you hear the fuel pump prime when you turn the key to "On" before cranking it over? Before starting, turn the key to "On" for a few seconds. Listen carefully for a faint "whirling" sound. Have you had the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...