Q: Tach not working

asked by on

Tachometer is not working any help

My car has 58000 miles.
My car has an automatic transmission.

Hi there. There are a few reasons why your tachometer is not working on your Dart. The tachometer on the instrument cluster may be bad, and the instrument cluster may need to be replaced. There also could be a problem with the speedometer shaft and its electrical components or transmission speed sensor that is faulty. It’s best to have a professional mobile mechanic complete an electrical problems inspection to pinpoint the source of your issues.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Tach not working

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Replaced master/slave cylinder and clutch pedal is hard as a rock and won't depress what could it be?

You need to open the bleeder on the slave cylinder to see if the clutch can be pressed down? If it still cannot be pushed down then the problem is in the clutch master cylinder and it is binding. If...

Q: Q: My car alarm is going off for no reason

Hi there. Check the sensibility of the car alarm. If the car alarm is set to a slight vibration and can pick up light vibrations, then check around the garage that would contribute to a light vibration. That may be...

Q: Q: Transmission issues

This may mean many different things ranging from just a basic service interval notification to other more severe transmission component failures. Generally, if there is something seriously wrong, you may get a more severe warning indicating to shut the engine...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.