Q: Q: Sunroof not working

asked by on

The sunroof stopped working.

There are a few possible reasons for your sunroof not to work. The most common are the sunroof motor and switch. I would have the motor and switch checked to see if they are getting power. I recommend seeking a certified mechanic, like one from YourMechanic, to come and test your vehicle’s sunroof and make the needed repairs for you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Sunroof not working

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Intermittent wiper speed setting is not working

The problem could be the intermittent wiper module in combination with the wiper switch or in the wiper motor itself. Problems occur with both of these components and only a component pinpoint test can narrow down the problem for you...

Q: Sunroof won't close properly

There are some minor adjustments that can be made in relation between the sunroof height and the sunroof cassette. One thing to note: if the adjustment is done improperly it can damage the cassette, sunroof, or both, which could be...

Q: Check Engine code is P0115

Hi. The most common repair for that code is the sensor itself. A low coolant condition can cause it as well so the cooling system will need to be inspected. It will need to be checked for leaks and the...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...