Skip the auto shop - Our mechanics make house calls

Q: Sunroof not closing

asked by on

The sunroof opens, but it won't close.

Hi. I would reset the sunroof by pressing the forward button for the sunroof for about 10 seconds. If it still does not shut, you may need to have the sunroof replaced or the switch replaced. If you need further assistance, I recommend you have a mechanic, like one from YourMechanic, inspect for possible electrical problems and replace any failing parts.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the Shift P warning mean?

If your Altima is equipped with a continuously variable transmission (CVT) and a start button, you may see the Shift P warning shown in the vehicle information display. This will show up any time you’ve pressed the push button to...

Q: Not getting fuel from fuel tank replaced fuel pump and filter I have a 85 720 nissan pick up

Hi there. I would recommend checking the fuel pump fuses to be sure the fuel pump is getting power to it. Also, check the ground wire to the fuel pump as well as this is a common issue when they...

Q: How do I control the tilt of the sun roof?

Your power sun roof has a tilt switch, which is located on the overhead console, across from the open and close switch. The tilt switch is on the passenger side of the overhead console. To open the tilt of the...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...